Formlabs SLS Materials
SLS Powders
Nylon PA 12, PA 11, and TPU powders engineered for the Fuse X1 and Fuse 1+ 30W. High refresh rates and consistent mechanical properties batch to batch.
Formlabs SLS powders are formulated specifically for the Fuse platform's selective laser sintering process. Each powder delivers predictable mechanical performance, high refresh rates to minimize waste, and excellent surface quality straight out of the breakout station.
All SLS Powders
5 powder formulations available
Nylon 12 Powder
The workhorse SLS material. Nylon 12 delivers high detail, low moisture absorption, and excellent chemical resistance for functional prototypes and end-use parts.
- Tensile Strength: 50 MPa
- Elongation at Break: 11%
- Flexural Modulus: 1.8 GPa
- Refresh Rate: 30%
Nylon 12 GF Powder
Glass-filled Nylon 12 for increased stiffness and dimensional stability. Ideal for structural brackets, housings, and parts requiring reduced creep.
- Tensile Strength: 51 MPa
- Flexural Modulus: 3.3 GPa
- HDT: 180°C
- Refresh Rate: 30%
Nylon 11 Powder
Bio-based Nylon 11 with superior impact resistance and elongation. Best choice for living hinges, snap fits, and parts requiring ductility.
- Tensile Strength: 48 MPa
- Elongation at Break: 40%
- Impact Strength: 65 kJ/m²
- Refresh Rate: 30%
Nylon 11 CF Powder
Carbon-fiber reinforced Nylon 11 for maximum stiffness-to-weight ratio. Designed for aerospace, automotive, and high-load structural applications.
- Tensile Strength: 57 MPa
- Flexural Modulus: 6.1 GPa
- Density: 1.1 g/cm³
- Refresh Rate: 30%
TPU 90A Powder
Shore 90A thermoplastic polyurethane for flexible, durable SLS parts. Excellent abrasion resistance and energy return for wearables, gaskets, and grips.
- Shore Hardness: 90A
- Elongation at Break: 330%
- Tear Strength: 40 kN/m
- Refresh Rate: 50%
Ready to scale with SLS?
Contact us to discuss powder quantities, refresh strategies, and how to maximize yield on your Fuse system.