Formlabs Consumables

Tanks & Platforms

Resin tanks, LPU light processing units, and build platforms for Form 4 and Form 4L. Keep your printer running at peak accuracy.

Formlabs resin tanks and build platforms are precision-engineered consumables that directly affect print quality and reliability. Replacing them on schedule ensures consistent first-layer adhesion, accurate layer separation, and optimal optical clarity throughout the tank's lifespan.

All Tanks & Platforms

Resin Tanks

Form 4 Resin Tank

Standard resin tank for the Form 4. Features a flexible film membrane optimized for LFS printing. Rated for up to 5 L of resin throughput before replacement is recommended.

  • Capacity: 1 L
  • Rated Throughput: ~5 L
  • Film Type: Flexible FEP
  • Printer: Form 4
Form 4
Single unit
Resin Tanks

Form 4L Resin Tank

Large-format resin tank for the Form 4L. Scaled for high-volume production with the same flexible film technology as the Form 4 tank.

  • Capacity: 4 L
  • Rated Throughput: ~20 L
  • Film Type: Flexible FEP
  • Printer: Form 4L
Form 4L
Single unit
Light Processing Units

Form 4 LPU

The Light Processing Unit (LPU) is the optical core of the Form 4. Replace when print quality degrades or the LPU reaches its rated print hours.

  • Light Source: Monochromatic LED array
  • XY Resolution: 50 µm
  • Rated Life: ~2,000 print hours
  • Printer: Form 4
Form 4
Single unit
Light Processing Units

Form 4L LPU

Large-format LPU for the Form 4L. Delivers uniform light distribution across the full 33 × 20 cm build area.

  • Light Source: Monochromatic LED array
  • XY Resolution: 50 µm
  • Build Area: 335 × 200 mm
  • Printer: Form 4L
Form 4L
Single unit
Build Platforms

Form 4 Build Platform

Aluminum build platform for the Form 4. Textured surface promotes first-layer adhesion. Replaceable when surface becomes worn or contaminated.

  • Material: Anodized aluminum
  • Build Volume: 200 × 125 × 210 mm
  • Surface: Textured for adhesion
  • Printer: Form 4
Form 4
Single unit
Build Platforms

Form 4L Build Platform

Large-format build platform for the Form 4L. Engineered for even load distribution across the expanded build area.

  • Material: Anodized aluminum
  • Build Volume: 335 × 200 × 300 mm
  • Surface: Textured for adhesion
  • Printer: Form 4L
Form 4L
Single unit

Not sure when to replace your tank or platform?

Our team can review your print history and recommend a replacement schedule to keep your Form 4 running at spec.

Contact Us